Drug Stability Chamber for Pharmaceutical Accelerated & Long-Term Testing, Meets ICH Q1B Standards
Designed to create precise temperature, humidity, and light environments for batch drug shelf-life evaluation, the drug stability chamber supports pharmaceutical firms’ accelerated, long-term, and high-humidity testing, plus large-volume moisture-proof cycle testing and mass drug storage.
- modelLYP-GSD Series
- brandLABEKS
- min. order1 pcs
- packageplywood case package
description
A scientific solution for batch drug shelf-life assessment, the drug stability test chamber generates controlled long-term stable temperature, humidity, and light environments. It is engineered to support pharmaceutical manufacturers’ accelerated, long-term, and high-humidity testing of pharmaceuticals and novel drugs, serving as an optimal choice for large-scale drug storage, stability testing, and extended moisture-proof cycle testing of bulk drug products.
features
Compliant with global and national standards: GB10586-2006; chemical stability technical guidelines, with intense light irradiation test capability of 4500 ± 500LX; and ICH Q1B, with total illumination ≥ 1.2 × 106Lux.hr and near-ultraviolet energy ≥ 200W.hr/m²
Equipped with 2 sets of fully enclosed, original imported compressors featuring automatic switchover between primary and standby units, ensuring uninterrupted, long-term operation of drug stability tests and overcoming the limitations of domestic chambers that cannot sustain continuous runs
Core components including temperature-humidity controllers, compressors, and circulating fans are imported, ensuring consistent, safe, and reliable long-term performance
Defrost-free continuous operation eliminates temperature and humidity fluctuations within the chamber that would otherwise occur during defrost cycles
A centrifugal motor drives fan blades to generate forced airflow, which is directed via an air duct to evenly distribute circulated air throughout the test chamber, fully guaranteeing internal temperature and humidity uniformity. A 50mm diameter test hole is located on the left side of the unit
Comprehensive safety protection features include grounding protection, leakage/open-circuit protection, heater and humidifier short-circuit protection, water system cut-off and water shortage protection, compressor overload protection, and independent studio over-temperature audible-visual alarm
Features an independent over-temperature audible-visual alarm that notifies operators promptly, safeguarding laboratory safety and preventing operational incidents
Compatible with printer or 485 communication interface connectivity, enabling temperature and time curve recording via computer or printer to ensure secure storage and playback of test process data
Robust structure comprising a test chamber body, air duct system, heating system, refrigeration system, humidification system, and electrical control module. The heater is positioned within the air duct to avoid direct radiation on test samples, ensuring uniform conditions, with a rational layout and sleek exterior
Durable water system with a long-running water pump that automatically replenishes water to the electric steam humidifier. A concealed water tank allows easy water refilling when pulled out, and a tank controller provides automatic water shortage alerts
specifications
Model | LYP-135GSD-CM | LYP-250GSD-CM | LYP-500GSD-CM | LYP-800GSD-CM | LYP-1000GSD-CM | LYP-1500GSD-CM |
|---|---|---|---|---|---|---|
Volume | 135L | 250L | 500L | 800L | 1000L | 1500L |
Temperaturecontrol range | 10 — 65.0℃(when there is light15.0-65.0℃) | |||||
Temperaturefluctuation | ±0.3℃ | |||||
Temperaturedistribution accuracy | ≤ 1.5℃ | |||||
Humidityrange | 15-95%R.H | |||||
HumidityControl Accuracy | ±3%R.H | |||||
Lightintensity | 100~10000LUX (adjustable) | |||||
Illuminationdeviation | ±500LUX | |||||
Illuminationlight source | Internationalstandard light source, LED white light | |||||
Lightingmethod | top light | |||||
Test hole | The rightside of the box is φ50mm | |||||
Noise | ≤60dB | |||||
Refrigerant | DuPont R134a(environmentally friendly refrigerant) | |||||
Controller | Color touchscreen programmable controller | |||||
Compressor | Two sets ofindependent Italian Zanussi compressors (fully enclosed), one for use and onefor standby can be switched freely | |||||
Humidificationmethod | Built-inelectric steam humidification, circulating water | |||||
Airconditioning method | Forcedventilation internal circulation balance temperature and humidity regulation | |||||
Heatingmethod | Nickel-chromiumalloy electric heater, PID adjustment | |||||
Sensor | GermanHeraeus Class A high-precision armored platinum resistance sensor. | |||||
Interior | SUS304mirror stainless steel plate | |||||
Exterior | Thecold-rolled sheet is processed and formed, and the surface iselectrostatically sprayed after pickling and phosphating. | |||||
Open doorstructure | Single door,the seal between the door and the box is made of environmentally friendlynon-polluting and anti-aging silicone rubber, and the door has a lockingdevice | |||||
Thermalinsulation material | Made ofultra-fine fiberglass wool | |||||
Door seal | Siliconerubber strip seal | |||||
Glass innerdoor | Double-layerinsulating glass 410×250 observation window | |||||
Waterstorage tank | built-in | |||||
Number oflaminates | 2 sets, (oneset includes illuminance sensor) can be adjusted up and down arbitrarily | |||||
Casters | 4 removablecasters, 2 with brake clips | |||||
Power supply | 220V±10%;50Hz; | |||||
Rated power | 1.2 KW | 1.5KW | 2.0KW | 2.0KW | 2.5KW | |
Runningpower | 0.5 KW | 0.5 KW | 0.8KW | 1.0KW | ||
Studio size(W*D*H) | 500×450×600 | 500×500×1100 | 750×600×1100 | 700×960×1200 | 760*1100*1200 | 1390*800*1350 |
Dimensions(W*D*H) | 950×630×1400 | 950×680×1650 | 1200×780×1750 | 880×1220×1960 | 950*1350*1960 | 1550*1250*2100 |
Communicationfunction | U diskexport record data, communication, accumulated timing, printing, datastorage, built-in 4GB memory card, mobile phone SMS alarm, three-levelauthority audit tracking function | |||||
why choose us
Premium Quality with CE & ISO
We conduct 100% performance testing on every unit, ensuring its stable operation and superior performance in your application.
24/7 Expert Technical Support
Our senior engineers are on standby 24/7, ready to provide expert solutions at any time to minimize your operational downtime.
20+ Years R&D & Production
Our deep technical expertise is your solid guarantee for professional and reliable OEM/ODM services.
Trusted in 80+ Countries
Industry leaders and research institutions in over 80 countries and regions rely on our equipment for stable operation.
True Manufacturer, Factory-Direct Price
Bypass the middlemen to get our factory pricing and speak directly with our core engineers.
Rapid & Reliable Delivery
Our extensive in-stock inventory provides a solid guarantee for rapid and reliable global delivery.

Our Factory
20 Years
58 Experts
20000 m²
7X24 Hours










